Mustang AOD Conversion Kit, Mustang AOD Conversion Kits - Early Mustang AOD Conversion Kit, Mustang AOD Conversion Kits

 

 

 

 

 

 

 

Performance Transmissions and Parts

www.TransmissionCenter.net
Parts Toll Free 1-888-2012066
Transmissions Toll Free 1-888-2012066
Speedometer Gears 1-888-8771008

Classic Mustang to AOD Conversion Kit

1965 to 1973 Mustang Conversion Kit

Convert your Mustang with a 289 / 302 / 351W / 351C motor from a 3 speed C4 or C6 transmission to an AOD overdrive transmission. You get the Dominator Junior transmission and torque converter rated at 550 horse power, custom AOD crossmember, Lokar throttle valve cable, speedometer gear based on tire height and gear ratio, AOD flywheel and a locking top dip stick. The performance model comes with your choice of a free T-shirt or auxiliary fluid cooler. The freight will run from free to $140.00 after freight discount in most cases on the performance model. This will produce up to a 40% increase in gas mileage and a 33% reduction in motor speed. Level 2 Cost $2429.00. Same package with a stock transmission and converter, level 1 Cost $1649.00. When ordering we need your motor size, motor year and horse power plus the car year, tire height and rear end ratio. You may also need the #89X shift lever kit and Holley or Edelbrock carburetor adapter. You may want to consider the mechanical diode kit for full throttle 1-2 up-shifts above 5000 RPM (fits 1991 - 1993 AOD transmissions only). The $4.00 per gallon gas will feel like $2.80 per gallon gas with an overdrive conversion. In the Comment Box: We need to know your motor size and year, year of car, carburetor brand, tire height, rear end ratio and if possible the number of teeth on your speedometer drive gear located on the output shaft.

    HPIM1320.JPG (45227 bytes)       

Small Installation Kit and Level 1 - Stock AOD
Qty
Under 300 HP
Delivery
Small Installation Kit and Level 2 - Dominator Junior
Qty
Under 550 HP
Delivery
Stall Speed

Other parts you may need for your conversion.   HPIM1606.JPG (14000 bytes)         

Other Parts You May Need Below

 

 

 

 

 

 

 

 

 

 

 

 

#F28. Fits 1968 to 1980 302 motors, 1965 on 289 motors and 1969 to 1981 351W motors with a 28-ounce imbalance factor. SFI 29.1 certified flexplate. Will work with C4, C6 and AOD transmissions. Thirty percent thicker than the OEM flex plate. 14.23" OD / 164 Teeth. Cost $75.00

Qty


F50. Fits 1981 to 2001 302 motors with a 50-ounce imbalance factor. SFI 29.1 certified flexplate. Will work with C4, C6 and AOD transmissions. Thirty percent thicker than the OEM flex plate. 14.23" OD / 164 Teeth.  Cost $75.00

Qty

 

 

 

 

 

 

 

 

 

 

 


 

 

 

 

 

 

 

 

 

#FZ. Fits Ford 302 motors and 351W motors with a zero static balance, internal balanced 14.23"OD / 164Teeth (NO WEIGHT). Will work with C4, C6 and AOD transmissions. 14.23" OD / 164 Teeth. Cost $65.00

Qty


 

 

 

 

 

 

 

 

 

#55F2. Fits 1981 to 2001 302 motors with a 50-ounce imbalance factor. Will work with C4, C6 and AOD transmissions. 14.23" OD / 164 Teeth. Cost $45.00

Qty

#55F. Fits 1968 to 1980 302 motors, 1965 on 289 motors and 1969 to 1981 351W motors with a 28-ounce imbalance factor. Will work with C4, C6 and AOD transmissions. 14.23" OD / 164 Teeth. Cost $45.00

Qty


FORD SMALL BLOCKS: 289, 302, 351C and 351 Windsor all have the same short bell housing bolt pattern.

FORD BIG BLOCKS: 429, 460, 351 Midland and 400 Midland all have the same tall bell housing bolt pattern.

FORD FE BLOCKS: 1958 to 1971, 332, 352, 383, 360, 390, 406, 427, 428 and 430 all have the same round bell housing bolt pattern. (FE Motor)

 

 

 

 

 

 

 

#89GL. AOD Selector Shaft and Arm. Can be adjusted to any angle and radius. Cost $58.00

Qty

#89. AOD, Lokar braided stainless steel throttle valve cable kit. Cost $76.00

Qty

 

 

 

 

 

 

 

 

 

HPIM1778.JPG (295363 bytes)  HPIM1775.JPG (261694 bytes)

Notice the Holley adapter on the carburetor and the helper return spring on the throttle valve lever. Press F11 for a better view. On a stock AOD the correct pressure adjustment usually is minimum throttle valve cable pull at minimum throttle opening (idle) and on an AOD with a Shift Kit installed the correct setting usually is full cable pull at full throttle.


 

 

 

 

 

 

 

 

 

#8LB. Stainless bracket mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and In-Line Dual Quads. Stainless bracket and GM designed dual stainless springs are used to mount Lokar’s Throttle Cable and Kickdown assemblies. Design provides improved clearance on Edelbrock carburetors. Design includes tension screw to prevent bracket from movement under extreme pressure on a kickdown cable, such as with a 700-R4 transmission. Cost $33.00

Qty

Tech Note: #8LB mounts Lokar Throttle Cables and Kickdowns for a nice clean setup. Be sure when installing your Spring Return Kit and Throttle Cable that your throttle pedal bottoms out at full throttle to prevent undue stress on the throttle shaft and other components.

srk4000-drawing.jpg (67188 bytes)


#29. AOD adapter for a Holley carburetor to install the throttle valve cable correctly. Usually this part will correct a hard light throttle 1-2 shift. With this kit getting the correct geometry is easy. Cost $33.00. Adapter for the Edelbrock carburetor $35.00. If you have an AOD transmission and one of these two carburetors you need this part.

Holley  
Qty
Edelbrock  
Qty

#1. Extreme Duty mechanical diode conversion kit for 1992 - 1998 AODE and 4R70W transmissions. Also fits 1991 - 1993 AOD transmissions. Replace your roller clutch with the much stronger mechanical diode. This is a weak point on early pre 1999 A0DE / 4R70W transmissions. Comes on the A O Dominator. Can be ordered as an extra on the Dominator Junior transmission if the correct core is available. Cost $134.00.

Qty

 

 

 

 

 

 

 

 #54-2. Ford 2WD universal transmission mount. Effectively controls transmission torque better than stock units, especially in high-performance applications. Soft enough to absorb vibrations for street use yet rugged enough for racing. Commonly used in stock car and drag racing. Helps control torque on heavy horsepower cars. Maintains proper drive shaft angle. Made of HYPER-FLEX performance polyurethane. Simply measure your mounts to match the measurements shown. Fits the above #RCMFB crossmember. Comes with two special bolts to fit the #RCMFB crossmember above. (Will not fit the 65 to 73 Mustang conversion kit.) Cost $41.00

Qty

 

 

 

 

 

mustang transmission mount









#94PM. Early Mustang AOD Conversion Poly Mount. Transmission mount for the 1964 - 1973 Mustang AOD transmission conversion. Cost $39.00
Qty

#94M. Early Mustang to AOD Conversion Mount. Transmission mount for the 1964 - 1973 Mustang AOD transmission conversion. Cost $28.00

Qty

 

 

 

 

 

 

 


 

 

 

 

 

 

 

 

 

#94X. Use this crossmember to install an AOD transmission in a 1964-1966 Mustang. Also fits Cougar. Cost $182.00

Qty

#94XM. Use this crossmember to install an AOD transmission in a 1967-1973 Mustang. We need to know what year you have. Also fits Cougar. Also fit TKO 500, TKO 600 and 3550 transmissions. May not fit a 69-70 that came originally equipped with a C6 transmission. Pictured is a 1973, if it fits this it will fit anything. Cost $139.00.

Qty
Year

_DSC1693.jpg (613804 bytes)  _DSC1695.jpg (3623657 bytes)

 

 

 

 

 

 

 

 

 

 

 

 

 

#94BP. Block plate for the AOD conversion in the early model mustangs. Fits 289, 302 and 351W. This is a two piece set, block plate and inspection plate. Don't buy a block plate unless you get both parts. The center to center bolt measurement on the inspection plate is 9 inches. Cost $90.00

Qty

$68.00 Block Plate Only

Qty

$22.00 Inspection Plate Only

Qty

 

 

 

 

 

 

 

 

 

 

#2FN. Four Ford torque converter nuts. Size 3/8 X 24. Cost $5.00

Qty

#1Y. Yoke 4R70W only. 1.600 inch shaft 5 inches long, 3 11/16 cross, 28 spline. - - - - - Yoke AODE / AOD / C4 only. 1.500 inch shaft 5 1/4 inches long, 3 1/4 cross, 28 spline. Cost $95.00

Qty
Yoke Type

 

 

 

 

 

 

 

#83UJ. C6 slip yoke. 31 spline with outside snap rings, fits C6 transmissions. Shaft 1-11/16 X 4-3/8 inches. 1 3/16 inch caps. About 3 11/16 inches across U-joint. Cost $95.00

Qty

 

 

 

 

 

 

 

#94X-2. C6 crossmember and mount to install a C6 transmission in a 1967 to 1973 Mustang. Cost $169.00

Qty

 

 

 

 

 

 

 

#53. Powder coated case, tail and pan. Cost $200.00

Black_Raptor.jpg (27797 bytes)  R1.jpg (155979 bytes)   RedRaptor13.jpg (50971 bytes)  BlackQuad4.jpg (398523 bytes) 

#74XXX. This is an AOD transmission dip stick and filler tube. It has a locking top. May require some bending on the top side with a tubing bender. Cost $27.00

Qty


#26. Shallow Cast Aluminum Pan fits AOD Transmissions only. Stock volume. Cost $200.00

Qty

#47RTF. Lucas Racing Transmission Fluid (5 quarts), AKA PATC Raptor Blood . Raptor Blood RTF is designed for high performance applications where heat and pressure are most damaging to your transmission and torque converter. Blended specifically for racing and performance by Lucas Oil, this fluid will lower transmission temperatures, extend clutch life, and maintain clean valves and passages. This fluid is also compatible with all types of transmission fluid. Shipped in 5 quart size only. Free shipping when ordered with a transmission. Works best when used with #47TOS Raptor Tamer below. Cost per 5 Quarts $39.00

Qty

  


_DSC3424.JPG (54733 bytes)

#47TOS. "Raptor Tamer"  AKA LUBEGARD PLATINUM Transmission Oil Supplement is the newest automatic transmission supplement to arrive. It reduces clutch slip by raising the coefficient of friction. It also stabilizes viscosity and enhances all automatic transmission fluids. No other additive does more. It goes beyond eliminating converter clutch chatter. It is the only supplement your transmission needs. Cost $15.00

Qty

#82. Ford speedometer driven gears for automatic transmissions. AOD transmissions use either a 7 or 8 tooth drive gear. Once you change the gears in your differential or tire size, you need a new speedometer driven gear to recalibrate your speedometer. They're inexpensive and only take a few minutes to change. We have 16, 17, 18, 19, 20 and 21 tooth gears. Cost $13.00

Qty
Teeth

#82X. 23 tooth Ford speedometer driven gears. For use with 4.10 gears with 7 tooth shafts in automatic transmissions. Cost $20.00

Qty


 

 

 

 

 

 

 

 

HPIM1655.JPG (138289 bytes) #9SS. Ford 8 pulse speed sensor for the above driven speedometer gears. This speed sensor works with cable only, pulse generator only or both cable and pulse generator at the same time. Cost $39.00

Qty

 

 

 

 

 

 

 

#8SS. Ford speed sensor for the above driven speedometer gears. Will not work with a speedometer cable. $29.00

Qty


#8C. Ford Speedometer Gear Clip. Cost $2.50

Qty

 

 

 

 

 

 

 

 

 

 

 

 

 

#9PT. Ford Speed Sensor Pigtail. Cost $15.00

Qty


Speedometer Cables

#4190.

 

72” Ford push on top / push on bottom. Cost $39.00 

 

HPIM1711.JPG (1993116 bytes)

 

Qty

#4270.

 

83” Ford 5/8 nut on top / Housing on bottom. Cost $45.00

 

HPIM1717.JPG (608645 bytes)

 

Qty

#4260.

 

60” Ford 5/8 nut on top / Housing on bottom. Cost $45.00

 

 

Qty

#6800. Ford 68 Inch Speedometer Cable. Snap on top with 7/8 inch threads at the bottom. This is the correct cable for the early Mustang Drag Pac (Drag Pack). This custom made cable is made to be used with a Ford ratio adapter or GM transmission such as a TH400 behind a Ford motor. Cost $45.00

Qty

 

 

 

 

 

 

#7200. Ford custom built 71 inch AOD speedometer cable that plugs in at the bottom and has a 5/8" threaded nut that screws on the top. For Ford EFI conversions. Use with #9SS 8 pulse speed sensor above. Cost $45.00

 

 

 

HPIM1711-2.jpg (31802 bytes)

HPIM1717-2.jpg (34699 bytes)

Qty

#7300. Used for EFI conversions or cruise control. You get the #7200 Ford custom built 71 inch speedometer cable that plugs in at the bottom and has a 5/8" threaded nut that screws on the top, speedometer gear housing with speed sensor, speedometer gear, gear clip and speed sensor pig tail. (Also works with the #4190 cable.) Cost $104.00

Qty
Tooth Count

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Deluxe AOD Installation Kit for 65 to 73 Mustangs

#K65M. You get the AOD to early Mustang crossmember, Lokar throttle valve cable, correct speedometer driven gear, correct flywheel, dip stick, shift lever kit, carburetor adapter for Holley or Edelbrock, transmission mount, block plate, inspection plate and four torque converter nuts. Cost $559.00

You can add to or remove from this kit as needed. An AOD with a 10 1/4" tail housing is only 1/4" longer than an early Mustang C4 therefore you should be able to reuse your old driveshaft and yoke. In the Comment Box: We need to know your motor size and year, year of car, carburetor brand, tire height, rear end ratio and if possible the number of teeth on your speedometer drive gear located on the output shaft. The only upgrades to this kit would be a SFI flexplate, cast aluminum pan, speedometer housing parts, wiring harness and oil. The $4.00 per gallon gas will feel like $2.80 per gallon gas with an overdrive conversion.

Qty

HPIM1320.JPG (45227 bytes)          wpe1.jpg (6408 bytes)       

See AOD Price and Option Chart Below

Level 1 - Stock AOD
Qty
2WD or 4WD
Under 300 HP
Delivery
Type

Level 2 - Dominator Junior

Qty
2WD or 4WD
Under 550 HP
Delivery
Type
Stall Speed

Level 3 - Dominator Junior Extreme
Qty
2WD or 4WD
Under 600 HP
Delivery
Type
Stall Speed
Level 4 - A O Dominator
Qty
2WD or 4WD
Under 750 HP
Delivery
Type
Stall Speed

Other parts you may need for your conversion.  

  #AODPT. AOD Neutral Safety Switch / Back-Up Light Pigtail. Factory correct molded connector with 16 inch wire leads. Connects to any Ford AOD automatic transmission. Cost $41.00

Qty
 

 

 

 

 

 

 

 

 

 

 

 

_DSC2729.JPG (17052 bytes) #AODNSS. AOD Neutral Safety Switch / Back Up Light Switch. Has 4 pins and also fits C3 / A4LD transmissions. Cost $39.00

Qty

shiftermount_1.jpg (49909 bytes)  

 

#1LS. The Lokar Floor Mount Automatic Transmission Shifter follows in the footsteps of its parent transmission mount and tailmount shifters, having been designed with the same superior craftsmanship. The exclusive floor mount brackets allow for installation above or below the floor on the transmission tunnel. Kit includes splined shift arm with three optional offset arms for mounting to right or left. Removal of the transmission is not necessary. Floor Mount Shifter is equipped with the expected safety features of a Lokar Shifter. Works well with early Mustang AOD conversions.

AOD - 6 Inch $241
Qty
AOD - 8 Inch $241
Qty
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Features
• Operates with solid adjustable linkage
• Neutral Safety Switch
• Positive Safety-Lock-Out in Park and Neutral
• 360-degree lever rotation for extra leg room
• Out from under-the-dash and away-from-the seat-lever adjustments
• Brushed aluminum shifter knobs available in original Mushroom, Black Anodized Mushroom or Hi-Tech Lokar tapered knob
• Easy-to-remove shifter knobs for simple boot installation
• Teflon lined button in shifter knobs for smooth operation
• Chrome-plated lever available in 23", 16", 12", 10", 8" and 6" lengths
• Gold iridited bracketry
• All hardware included for installation
• Available for GM, Ford and Chrysler automatic transmissions
• Rectangular boot rings sold separately

shifter_brackets.jpg (50914 bytes)
shiftermount_2.jpg (46429 bytes)  

shifter_sq_mntboot.jpg (47187 bytes)

Lokar Rectangular Floor Mount Shifter Boot

#1LB. Lokar Shifter Boots are black Naugahyde and all sets include a boot, polished stainless base ring, OR billet aluminum ring with ball-milled edge and stainless screws. Classic Shifter Boots include foam rubber seal to eliminate airflow from the floor through the boot. The Classic Shifter Boot is designed with a polished stainless bezel on top of the boot, which fits over the shifter lever. No unsightly pull ties or laces; boot hugs the shifter lever. Ring Diameter: 6-3/4" x 5-1/4" OD / 5-1/2" x 4" ID. Cost $38.00

Qty

 

 

 

 

 

 

LEDIndicator-2.jpg (13350 bytes)  #CINB-1767. Lokar's AOD Cable Operated LED Shift Indicator is designed for the flexibility to mount it in a variety of locations under the hood such as on the transmission, attached to the frame rail, to the floor pan, on the firewall or on the inner fender well, etc. Remote Mounting Kit available for those out of the way, distant locations inside the vehicle, such as under the dash, behind the seat or in the trunk. Cost $78.99

Qty

  • Arm and Ball-Milled Sensor Housing CNC machined from 6061-T6 Billet Aluminum
  • Programmable Solid State Circuit Board within the decoder box
  • Cable operated for flexibility in mounting
  • Kit includes 5' of u-cut-to-fit stainless steel braided housing and 6' of inner control wire
  • Back-Up Light circuit built in
  • Neutral safety switch built in
  • Long Life LED Indicators
  • Stainless steel and zinc plated mounting hardware
  • Zinc plated Universal Angled Mounting Brackets
  • Displays transmission position in engaged gear only
  • Color-coded wiring instructions for easy installation
  • Compatible for use with all Lokar Automatic Transmission Shifters
  • Compatible with many other aftermarket shifters
  • Available for most GM, Ford and Chrysler transmissions
  • All Lokar Cable Operated LED Shift Indicator Kits available in Horizontal or Vertical Dash or Boot Mount
  • Sensor Kit required. (Sold Separately)
  • Remote Kit available with 7' feet of u-cut-to-fit stainless steel braided housing and 13' of inner control wire and adjustable fitting. (Sold Separately)

 

 

 

 

 

 

LEDIndicator-1.jpg (18852 bytes)  #CINS-1798. Lokar's AOD Cable Operated LED Shift Indicator is designed for the flexibility to mount it in a variety of locations under the hood such as on the transmission, attached to the frame rail, to the floor pan, on the firewall or on the inner fender well, etc. Remote Mounting Kit available for those out of the way, distant locations inside the vehicle, such as under the dash, behind the seat or in the trunk. Cost $154.99

Qty

  • Arm and Ball-Milled Sensor Housing CNC machined from 6061-T6 Billet Aluminum
  • Programmable Solid State Circuit Board within the decoder box
  • Cable operated for flexibility in mounting
  • Kit includes 5' of u-cut-to-fit stainless steel braided housing and 6' of inner control wire
  • Back-Up Light circuit built in
  • Neutral safety switch built in
  • Long Life LED Indicators
  • Stainless steel and zinc plated mounting hardware
  • Zinc plated Universal Angled Mounting Brackets
  • Displays transmission position in engaged gear only
  • Color-coded wiring instructions for easy installation
  • Compatible for use with all Lokar Automatic Transmission Shifters
  • Compatible with many other aftermarket shifters
  • Available for most GM, Ford and Chrysler transmissions
  • All Lokar Cable Operated LED Shift Indicator Kits available in Horizontal or Vertical Dash or Boot Mount
  • Sensor Kit required. (Sold Separately)
  • Remote Kit available with 7' feet of u-cut-to-fit stainless steel braided housing and 13' of inner control wire and adjustable fitting. (Sold Separately)

To upgrade to the level 3 transmission add $129.00 to the level 2 price. To upgrade to the level 4 transmission add $429.00 to the level 2 price.

AOD Transmissions Level 1 - Stock AOD Level 2 - Dominator Junior  Level 3 - Dominator Junior Extreme Level 4 - A O Dominator
Torque Converter Stock #14 #14 #16
Throttle Valve Cable Extra Extra Extra Extra
Dip Stick and Tube with Lock-Top Extra Extra Extra Extra
Mechanical Diode No No Yes Yes
Overdrive Servos Stock A+ A+ A+
Band Stock Carbon Fiber Carbon Fiber Wide Carbon Fiber
Clutches Alto Brown Alto Brown / Alto Red Eagle Alto Brown / Alto Red Eagle Alto Brown / Alto Red Eagle
Superior Posi Shift Pac No Yes Yes Yes
Spiral Roller Clutch Snap Ring No Yes Yes Yes
Wide Ratio Gear Set - 15% lower 1st, 5% lower 2nd No No No Yes
Free Cooler or Shirt No Choice of One Choice of One Choice of One
Free Freight No Up to $110.00 off Business or Depot Up to $110.00 off Business or Depot Up to $110.00 off Business or Depot
Stall Speeds Stock 1600 to 1800 1800 or 2500 1800 or 2500 1800 or 2500
Speedometer Gears Extra Extra Extra Extra
Hard Lock-Up Shaft No Yes Yes Hard Intermediate Shaft, No Lock-Up Shaft Needed
Price $1320.00 $2070.00 $2199.00 $2499.00
Transmission Horse Power Rating 300 550 600 750
Upgrades Cast Aluminum Pan, Powder Coating, Mechanical Diode, Non-Lock-Up Converter, #90 Wide Ratio Gear Set
Comments
It's now possible to install a Ford AOD overdrive transmission on a Ford FE 390 motor, ask. Transmission ratings are for non-supercharged systems using pump gasoline. Superchargers, Nitrous, 4WD, Oversize Tires and Weight will change these ratings. Home delivery without lift gate $85.00 extra (2 people), home delivery with lift gate $160.00 extra (1 person). The freight will be much less if the transmission is delivered to a business or freight depot.

Free Freight Deal !  Extended for an indefinite period of time! Buy any performance / heavy duty overdrive transmission and converter and we'll pay up to $110.00 on the freight.

Buy a level 2, 3 or 4 AOD transmission and torque converter anytime during 2011 and receive your choice of a PATC fluid temperature gauge, transmission cooler or PATC Racing T-shirt Free !

_DSC1387.JPG (222411 bytes)  DYNO7.jpg (299328 bytes)  _DSC1396.JPG (1238937 bytes)  _DSC1410.JPG (693622 bytes)  _DSC1393.JPG (442939 bytes)  DYNO6.jpg (264549 bytes)

PATC Transmission Dyno

PATC Torque Converter Video, Click Here

_DSC2965.JPG (1569652 bytes)  _DSC2971.JPG (1739893 bytes)  _DSC2968.JPG (1239213 bytes)  _DSC2973.JPG (1420629 bytes)  _DSC2974.JPG (1425217 bytes)  _DSC2978.JPG (1176155 bytes)  _DSC2980.JPG (1079600 bytes)  _DSC2982.JPG (523713 bytes)  _DSC2984.JPG (838162 bytes)  _DSC2989.JPG (1147335 bytes)  _DSC2987.JPG (338080 bytes)  _DSC2994.JPG (862078 bytes)

All PATC performance torque converters are manufactured in-house. This is some of the machinery in our torque converter shop. Main Torque Converter Page Click Here.

Performance Automotive

and

Transmission Center

Toll Free Transmission and Speedometer Gear Orders 1-888-8771008

Toll Free Parts Orders 1-888-2012066

Back to Transmission Price List, Click Here

#56FE. Adapter to install an AOD transmission on a Ford FE motor. This kit includes everything including the starter. Cost $850.00

Qty

352, 360, 390, 406, 410, 427, 428

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

#289. Early 5 Bolt 289 Motor to AOD Transmission. This kit will allow you to bolt any small block ford transmission to the older 260 / 289 5 bolt blocks. Cost $695.00

Qty

#56Y. Adapter to install an AOD transmission on a Ford Y-Block motor. This kit includes everything including the starter. Cost $850.00

Qty

272,  292,  312

 

 

 

 

 

 

 

 

" Billet Aluminum "

1994 to 1998 4th Generation Mustang Crossmember

#RCM4. This billet aluminum transmission crossmember provides unique G-Force styling with the strength of billet. Designed as a direct replacement for 1994 - 1998 Mustangs. It also provides clearance for dual exhaust systems. This crossmember provides a level of function that is equal to it's great looks and styling. Cost $159.00

Qty

#33C. PATC Silk Screen Shirts. Cost $12.00

Qty
Shirt Size

 

 

 

 

 

 

 

 

 

 

 

V8 Performance 5R55S Stall Converters

 

 

 

 

 

 

 

 

 

 

 

#5R8. Fits 2005 up 4.6 Liter V8 Mustangs with the 5R55S transmission. Can be ordered with stall speeds up to 3000 RPM and has all bearing construction, furnace brazed fins plus a carbon fiber clutch lining. No trade-in on this one. This performance 5R55S torque converter is built using a Billet Lock-Up Clutch Piston to eliminate the piston rattling problem with the stock type piston. This feature alone is worth $100.00. No down time, keep your old stock converter. No core charge. Can be ordered in stall speeds of 1800 to 3000 RPM. Rated at 600 horse power. Dollar for dollar this converter will do more for your time than any other part. Cost $575.00

Qty
Stall Speed

V6 Performance 5R55S Stall Converter

#5R. Fits 2005 up 4 Liter V6 Mustangs with the 5R55S transmission. This converter will stall at 3000 RPM and has all bearing construction, furnace brazed fins plus a carbon fiber clutch lining. No trade-in on this one. In the past you had to send your torque converter in to be redone, no more. Be one of the first to own this hot V6 stall converter. You'll feel a big difference on the first take off. This torque converter comes with a new OEM pre-drilled flexplate as a two piece set. This torque converter will lower your 60 foot time .2 seconds and the 1/4 mile time by .5 seconds. The competitions 3000 stall speed converter was tested in the 1/4 mile then removed, and a PATC 3000 stall speed converter was installed and tested, resulting in a .2 second lower time in the 1/4 mile. This was due to the PATC converter being a smaller diameter than stock. No down time, keep your old stock converter. No core charge. Can be special ordered in stall speeds of 2000 to 3500. Dollar for dollar this converter will do more for your time than any other part. Cost $499.00

Qty

 

 

 

 

PATC provides you with quality AOD performance automatic transmission parts the others don't sell. 
 

Transmission parts, AOD transmission rebuild kits, Lubegard transmission fluid supplements and additives, transmission solenoids, shift solenoids, AOD automatic transmission tools, transmission shop tools, shift kits, Transgo performance shift kits, HD2 and tugger shift kits, transmission coolers, Lokar, AOD ATSG transmission repair manuals, transmission filters, transmission bushings, transmission thrust washers, Torrington bearing kits, AOD Red Eagle Alto clutches, automatic transmission gaskets, transmission rebuilding kits, AOD transmission bands, bonded rubber pistons, performance servo pistons, performance rebuild kits, Powerglide transmission parts, transmission swap kits, transmission shift solenoids and pressure switches for automatic transmissions.

We carry brand name AOD products from Sonnax transmission parts, Superior / Fairbanks transmission parts, ATSG transmission repair manuals Lubegard additives, Dr Tranny Products, Precision International, Derale Transmission Coolers, Teckpak® Fitzall, Transgo Shift Kit® and Transgo Performance Reprogramming kits, Transgo Valve Body Kits, Alto Red Eagle clutches, Superior AOD Transmission Parts, Parker Hannifin Corp, JBH Distributing transmission tools.
 Everything in AOD transmission parts from Transmission gaskets, Transmission Solenoids, Performance Shift kits, Metal clad seals, Transmission rebuild kits, Transmission bands, Transmission filters, Automatic transmission bushings, Torrington bearing kits, Automatic transmission rebuilding tools, Transmission sprags . . . . . . 

AOD Transmission Parts from PATC, Alto AOD Transmission Master Kits, Transgo Shift Kits, Sonnax Transmission Parts, Transmission Pan Coolers, Lokar, Speedometer and Odometer Gears, Transmission Coolers, Solenoids, Fairbanks / Superior Performance Transmission Parts, Transmission Torque Converters, 700 Raptor Transmissions, Performance Transmissions for GM / Dodge / Ford, ATSG Repair Manuals, Transmission Filters, Rebuilt and New Transmission Pumps, Performance Bands, AOD Transmission Tools, High Performance AOD Transmission Parts and many other Transmission Products.

Back to Main Web Page